29 / 45
2.4
Intended use
The machine is designed for making crimp connections.
The maximum wire cross-section to be processed depends on the respective application (con-
tact and cable).
For standard applications, the following guide sizes are used (exceptions possible):
+
up to max. 10 mm² depending on the contact design
+
up to max. 16 mm²
+
up to max. 6 mm²
+
up to max. 16 mm²
+
up to max. 50 mm²
The machine is designed to accept the adapters approved by the manufacturer. The adapter
may only be fitted with the dies specified by the manufacturer.
2.5
Predictable misuse
The manufacturer or distributor is not liable for damage resulting from improper use: the risk for
this is borne solely by the user.
Examples of predictable misuse:
+
Use of contacts in a pair of dies not intended for this purpose.
+
Use of contacts and incorrect conductor cross-sections.
+
Use of contacts in the wrong crimp profile.
+
Use of adapters not approved for the machine.
+
Using the machine for punching, riveting or stamping.
