43 / 45
10
Troubleshooting and fault analysis
Risk of injury
If defects or damage to the machine are detected, it must be shut down immediately and secured
against unintentional or unauthorized startup.
Faults and malfunctions may only be rectified by authorized persons who have been trained for
this activity.
Error / Fault
Remedy and Explanation
No mechanical action
when operating the
foot switch.
Is the machine connected to the power supply?
Is the ready button unlocked?
Call service technician.
Machine does not
close or die does not
move down.
Call service technician.
Have the maintenance intervals been adhered to?
Too much or too little grease in the machine.
Machine / die does
not open.
Master cylinder has
not reached the end
position.
Die is not closed or
jammed.
Press reset button.
Crimp is not ok!
Wrong cable cross-section?
Correct crimp profile selected?
Basic setting adjusted?
Call service technician.
In case of problems, the customer service is at your disposal. The service address can be found
on page 2 of these operating instructions.
Please have all necessary information ready for the conversation, including:
+
Machine type
+
Serial number of the machine
+
PN & serial number of the adapter
+
PN oft the die
+
Photos / Videos
WARNING
