Automatic sauna splash system, Sauna Plus 8
Index: 05 Change date: 11.09.2018
Operating instructions no.: BA DW 003-05 Sauna Plus 8 EN 24+230V.docx
Page 17 of 76
4
Assembly
The work described here may only be performed by appropriately trained
specialist staff of a specialist company.
4.1
Selecting the place of installation
The place of installation must have the following characteristics:
1.
The place of installation must be protected against frost.
2.
The system must be protected against direct sunlight.
3.
An electrical power connection with ground contact must be available.
4.
Good air supply and extraction are recommended for the installation room.
5.
A waste water connection must always be available. (only required for version
with system separation)
4.2
Assembly information (installation suggestion)
The automatic sauna splash system is mounted on a wall in the utility room. The
pipe to the sauna heater should be as short as possible. Consider the space required
for operation and maintenance of the device described in
Section 3.4 Technical data
.
The warning and information signs required according to the locally applicable
accident prevention regulations (Germany: GUV-V D05) must be attached at the
intended positions before the beginning of the installation.
