ADHERE STRICTLY TO THESE
AND ALL OTHER SAFETY
INSTRUCTIONS AND GUIDELINES
· Ensure a barrel blocking device is fitted
to the ANGEL.
· Ensure the hopper is removed from
the ANGEL.
· Ensure that there are no paintballs
in the ANGEL.
· Always remove the first stage regulator and
release all residual gas pressure from the
Angel before disassembly.
· The Angel can hold a small residual gas
charge, typically two shots, with the first stage
regulator removed. Always discharge the Angel
in a safe direction to relieve this residual gas
pressure.
· SHOULD YOU BE UNSURE AT ANY STAGE YOU
MUST SEEK EXPERT ADVICE.
LPR spool replacement
The LPR may be serviced once it has been removed
by following the LPR assembly removal. The
serviceable parts are the external O rings and
the LPR spool.
•
Remove the LPR piston
.
•
Remove the LPR spring stack
noting the order.
•
Remove the LPR shims
.
Note: the number of shims may vary from the
shown diagram.
•
Remove the piston spacer
.
•
Remove the LPR spool retaining clip (circlip)
using a suitable blunt pick. You may need to
rotate the circlip to align the groove in the LPR
body
with the hole in the circlip
.
•
Remove the LPR spool
.
•
Discard LPR spool and replace with a new item.
LPR spool Removal
SPRING STACK
ORDER
