wbox DVR 160, User Manual

Page: 11 / 92

DVR 160 User Manual | 11
MENU ( )
To display the menu OSD.
EPG ( )
To display the Electronic Program Guide. Press
again to return to the normal mode.
EXIT ( )
To exit from the current menu or cancel the current
operation in menu state.
INFO ( )
To display the information about the channel.
CH ▲ / ▼
To change the TV/radio channels Up/Down.
VOL ◄ / ►
To increase or decrease TV/Radio volume level or
change the value of an item with preprogrammed
values. The “
◄ ” button can be used as a
backspace to cancel the numerical input.
OK ( )
To select a menu or confirm the user’s action and
display the channel list during watching a program.
Audio Language ( , hereafter “Red”)
To display the provided audio language lists of the
current channel.
Sound Mode ( , hereafter “Green”)
To select the sound mode (stereo, left, or right) .
Teletext ( , hereafter “Yellow”)
To display the teletext information about the
channel if applicable.
Subtitle ( , hereafter “Blue”)
To select the subtitle language between On and Off.
NUMERICAL BUTTONS ( )
To enter a TV/Radio channel number or characters.
PAGE ( )
To change the TV/Radio channels lists by the page.
File Management ( )
To show the recorded file, SW, or MP3 file list.
Fast Rewind/Forward ( )
To rewind/forward the playback during the recorded
file playback. Whenever you press
, the forward
playback speed increases by 4 steps (x 2, x 4, x 8,
x16). And whenever you press
, the rewind
playback speed increases by 4 steps (x 1, x 2, x 4,
x8). If you press the button in the progress bar state,
DVR 160
resumes to the playback with normal
speed after 20 seconds backward/forward rewind.
Playback ( )
To show the progress bar. If you press the button in
the trick mode or paused state, DVR 160
resumes
to the playback with normal speed.
Pause ( )
To pause the playback.
Slow Motion Playback ( )
To change the playback speed into the slow motion
mode.
Stop ( )
To stop the playback or the recording.
Recording ( )
To record the current channel or show the record
menu in the recording state.
Repeat ( )
Whenever you press the button, the repeat mode
changes sequentially such as a specified block
repeat
→ all block repeat → the repeat mode Off.