QUICK START INSTRUCTIONS
WSM3300
For parts, product & service information
visit
www.waynepumps.com
12 Volt Advanced
Notification System
OPERATING INSTRUCTIONS & PARTS MANUAL
READ, UNDERSTAND AND FOLLOW ALL INSTRUCTIONS IN THIS MANUAL - DO NOT DISCARD.
Failure to follow these instructions could result in property damage, bodily injury or death.
© 2012, WAYNE/Scott Fetzer Company.
354100-001 10/12
STEP 1 - VERIFY PACKAGE CONTENTS
STEP 3 - INSTALL BACK-UP AND FLOAT SWITCH
STEP 4 - INSTALL BATTERY
STEP 6 - CONNECT WIRES
STEP 7 -
POSITION BATTERY AND CONTROLLER
Select Language
English Español Français
STEP 8 - CONTROLLER SETUP
WAYNE - WSB1275
WAYNE - WSB1240
or
12 Volt Deep Cycle Marine Battery
12 Volt SLA (Sealed Lead Acid)
12 Volt Deep Cycle Battery
12 Volt Wet Cell Battery
Size = min 40Ah
Acceptable Batteries
Transformer
Wear safety glasses when
connecting the battery
STEP 5 - CONNECT LID TO BATTERY
Transformer (1)
Lid and Controller Assembly (1)
Battery box (1)
12 Volt DC back-up pump (1)
Switch with clamp (1)
Last Auto Test: --/--/--
MENU MUTE RESET
12.1 V
System Armed & Ready
100%
Select the starting language and follow the on-screen
instructions to set up the controller. Upon completion of
controller setup, restore AC power and test the main pump as
described in the operation section of the manual.
Red
Black
Does not include:
12 Volt DC deep cycle
battery, phone jack,
phone line, pipe, and
necessary fittings.
Home Display
Startup Display
Float Switch
Security
DC Pump
Requires active telephone land line service
STEP 2 - DISCONNECT POWER
If the power disconnect
is out of sight, lock in the open
position and tag it to prevent
unexpected application of power.
Failure to do so COULD result in fatal
electric
shock!
Drain
Tile
Phone
12
3
6
9
Minimum charge time
before usage is 24 hours
