please do not return this product to the store.
Call Us Directly! Our Trained Technicians Will Answer Your Questions and/or Ship Any Parts You May Need
You can reach us Toll Free at
1-888-827-3667
for Consumer Assistance or online at
www.wayne-dalton.com
14
TO AVOID POSSIBLE INjuRy OR
PROPERTy DAMAGE, KEEP PEOPLE AND
OBjECTS CLEAR OF THE MOVING DOOR
ARM.
note:
If necessary, activate the opener
to move the trolley/ upper door arm to the
closed position.
note:
If you have a 9100, 9400,9600,
5120, 5140 or 9700 series door, with one of
the door brackets shown at the right and a
Torquemaster
®
Or Extension Spring(s)
counterbalance system, see “Setting Trolley
Close Position/ Connecting Door Arm To
Door” on pages 23-24. If not, complete this
step.
note:
If you have a 9100, 9400, 9600,
5120, 5140 or 9700 series door, with one of
the door brackets shown at the right and a
Torsion Spring(s), see “Setting Trolley Close
Position/ Connecting Door Arm To Door” on
pages 25-26. If not, complete this step.
Trolley must be at the factory preset fully
closed position, (see illustration).
Verify preliminary trolley close position is
11” to 13” between trolley clevis pin and the
inside face of the door.
If adjustment of the trolley position is
required, use the close travel adjustment
screw located on the bottom of the opener.
A 1/4 turn equals approximately 1” of trolley
travel; turn clockwise to decrease distance
between trolley and door and counter-clock-
wise to increase distance between trolley
and door.
OPEN
CLOSE
MORE
LESS
MORE
TRAVEL ADJUSTMENT
setting trolley close position
20
Tools Needed:
Pliers/Wire Cutters
Tape Measure
Flat Tip
Screwdriver
Bottom Of Opener
Door Bracket
upper Arm
Trolley
(Closed Limit Position)
11” to 13”
(13” Minimum
For Belt Drive)
Pull Knob
Release Cord
Tag
warnIng
Models:
9100, 9400, 9600, 5120
and 5140.
single and double tab door Brackets
Model:
9700
single tab
Bracket
double tab
Bracket
single tab
Bracket
double tab
Bracket
