WBSn-2400 User Guide
Page - 14 -
6.
Complete the parameters, to set up your initial networking configuration.
Note: Further configuration parameters are available, and should be specified in order to complete
your set-up. For more information, see
Further Configuration Features
.
Parameter
Description and value
Network mode
Bridge
IP address
The current IP address of the unit
Mask
The current subnet mask used to establish the broadcast domain. The default mask of
the unit is 255.255.255.0.
Gateway
The current IP address of the default gateway.
IP Method
Select Manual or DHCP
VAP Name
The default VAP name string
Security mode
Specify the required Wi-Fi security protocol for the VAP
Password
Specify a unique password for the Wi-Fi security
Automatic Channel Selection screen
The Automatic Channel Selection utilizes an embedded algorithm to scan for the best channel with which
your base station can work, ensuring optimal capacity, minimal interference and maximum performance.
1.
Click Press to start ACS scan. The scan begins, and a progress indicator is displayed, showing the
percentage of completion.
When the scan is complete, (after approximately five minutes), the button label changes to ACS
done.
The ACS results are presented on the screen, showing a bar graph with the quality of each channel
presented by the height of the bar.
2.
You are requested to exit the Setup Wizard, by clicking Exit.