E• Puntas de Prueba de Seguirdad
E• Puntas de Prueba de Seguirdad
E• Puntas de Prueba de Seguirdad
E• Puntas de Prueba de Seguirdad
Las puntas de prueba suministradas con el multímetro incluyen unos conectores de
banana protegidos para eliminar la posibilidad de descargas eléctricas. Las puntas
están parcialmente aisladas para evitar cortocircuitos en áreas con alta densidad de
componentes. El usuario puede quitar dicho aislante si lo desea. (Ref: TL245).
F • Cordons de Sécurité
F • Cordons de Sécurité
F • Cordons de Sécurité
F • Cordons de Sécurité
Les fiches banane des cordons sont munies de protecteurs fixes afin de supprimer
les risques de chocs électriques. Les pointes métalliques sont partiellement isolées
pour éviter des court-circuits dans des circuits denses. Cette isolation peut être
enlevée. Numéro de commande: TL245 .
SPECIFICATIONS
SPECIFICATIONS
SPECIFICATIONS
SPECIFICATIONS
General Specification
General Specification
General Specification
General Specificationssss
Display: 4 digit LCD, 9999 counts, with
annunciators, menu features and 41
segment
bargraph.
Polarity Indication: Automatic
Input overload indication: I.OL.
Low Battery Indication:
+ -
; less than 50
hours battery life remain, accuracy is no
longer
guaranteed
Display Update Rate: 2/sec, nominal;
20/sec for bargraph.
Oper. Temp. (0 - 80% R.H.): 0°C .. +50°C
Storage Temp: -40°C to 70°C, 0 to 95%
RH, battery removed
Temperature coefficient: <0.1 x (spec. accu-
racy)/ °C (0° to 20°C and 30° to 50°C)
Environment: Indoor use, Altitude up to 2000m
Fusing: 0.25A/500V; I.R. 10kA (6.35x32mm)
15A/600V; I.R.100kA (10x38mm)
Power: Standard 9-volt battery,
NEDA1604, JIS 006P, IEC 6F22
Auto Power-Down: Meter powers down
after approx. 60 minutes of inactivity.
Not in Min/Max function.
Battery Life (typical): 450 hours, alkaline.
Backlight usage consumes extra power
and will decrease battery life significantly.
Backlight auto-off after approx. 60 seconds.
Dimensions, without holster (H x W x D):
7.2” x 3.3” x 1.9”, (183x84x47 mm)
Weight (incl. battery): 478 g (17.3 oz)
Accessories: Test leads, spare 0.25A/500V
fuse*, battery*, and Operator’s Manual
* in instrument
Case material: Flame retardant, high-impact
thermoplastic
Safety:
Safety:
Safety:
Safety: Meets EN61010-1. Cat II -1000V;
Cat
III - 600V; Pollution degree 2; Class II.
EMC
EMC
EMC
EMC: Meets EN50081-2, EN50082-2
This product complies with
requirements of the following
European Community Direc-
tives: 89/336/EEC (Electromagnetic Compatibil-
ity) and 73/23/EEC (Low Voltage) as amended
by 93/68/EEC (CE Marking). However, electrical
noise or intense electromagnetic fields in the
vicinity of the equipment may disturb the
measurement circuit. Measuring instruments
will also respond to unwanted signals that may
be present within the measurement circuit.
Users should exercise care and take appropriate
precautions to avoid misleading results when
making measurements in the presence of
electronic interference.
- 27 -