WaveRider EUM3006, Installation Manual

Page: 39 / 64

22 APCD-LM048-1.1
4: Installation
Table 4 Installation Stage Checklist
Once the installation is complete and verified, the network operator can complete the Post-
installation Stage, using the Automatic Remote Configuration feature or manually over the air.
This is discussed in
section 4.4 , Post-Installation
Step Discussion
section 4.3.1 , Locating the
EUM3006
Find the best location for mounting the EUM3006, with a
good RF signal and at least 1 foot away from where
people will stand.
section 4.3.2 , Mounting the
EUM3006
The EUM3006 mounts to a vertical pole with a diameter
between 1 and 3.0 inches. Once a location with good
signal levels is found, attach pole mounting hardware
such as a standard Satellite TV mount, to the building or
support structure. Attach the EUM3006 to the pole with
the mounting plate and the two gear clamps.
section 4.3.3 , Running
Cables
Run the Ethernet cable from the modem to the PoE
Injector and run the grounding conductor to a suitable
grounding location.
section 4.3.4 , Provide
Power to the EUM3006
Connect the modem to a power source, usually the PoE
injector provided.
section 4.3.5 , Connecting
the End-User’s PC
Connect the modem to the end-user’s PC.
section 4.3.6 , Testing the
Data Link
Confirm that the link is functioning correctly.