WaveRider EUM3006, Installation Manual

Page: 19 / 64

2 APCD-LM048-1.1
1: Introduction
These manuals provide information not included in this Installation Guide, including
information on:
• Planning, installing and managing the network.
• Diagnostic tools for the network and EUM.
• Details on the Command Line Interface and methods of accessing the EUM.
• Manual configuration of the EUM via the CLI.
• Glossary of network terms.
These manuals, as well as manuals for hardware elements, including EUMs and CCUs, can
be found on WaveRider’s Web site (
http://www.waverider.com ).
Other documents on the WaveRider web site are useful to assist in installing and operating the
EUM3006. For example, you can find information on which roof and wall mounting brackets
are recommended.
WaveRider recommends that you be familiar with the following sections before proceeding
with the instructions in this guide:
• Software License Agreement on page iii
• Warranty on page iv
• Conventions on page xii
• Warnings and Advisories on page xiii
• Important Safeguards on page xiv
NOTE: The information contained in this manual is subject to change
without notice. The reader should consult the WaveRider web
site for updates.
1.2 EUM3006 Features
The EUM3006 is a major step in the evolution of the LMS4000 900MHz Wireless Internet
Modems offered by WaveRider. It is a Power-over-Ethernet, outdoor unit with integrated, high-
gain, active diversity antenna.
The EUM3006 complements the existing LMS4000 Products:
• The CCU3000 and the NCL1900 are the current base station products;
• The EUM3004 with its diversity antenna is the current indoor end-user modem,
providing easy installation for areas with signal levels that allow for indoor
installations;
• The EUM3006 with its integrated antenna completes the product line, providing an
outdoor unit for areas where the indoor unit is not usable, due to operational or RF link
considerations.