WaveRider EUM3006, Installation Manual

Page: 14 / 64

:
APCD-LM048-1.1 xiv
It is the responsibility of the operator to ensure that the public is not exposed to excessive
Radio Frequency (RF) levels. The applicable regulations can be obtained from local
authorities.
WARNING!
The EUM3006 Integrated Outdoor Modem must be properly
grounded. WaveRider assumes no liability for failure to
adhere to this recommendation or to recognized general
safety precautions.
WARNING!
To comply with FCC RF exposure limits, the EUM3006 must
be fix-mounted outdoors to provide a separation distance of
30cm (1 foot) or more from all persons to satisfy RF exposure
requirements. The distance is measured from the nearest
point of the modem to the human body. It is recommended
that the modem be installed in a location with minimal
pathway disruption by nearby personnel.
Important Safeguards
WARNING!
CAUTION: To reduce risk of electrical shock, do not remove
covers, since there are no user-serviceable parts inside.
Refer servicing to qualified personnel.
1. Read all these instructions before installing and operating the EUM3006.
2. Retain these instructions for future reference.
3. Heed all warnings on the EUM3006 and in these instructions.
4. Follow all instructions.
5. Do not use EUM3006 and PoE Injector near water.
6. Unplug EUM3006 and PoE Injector from the wall outlet before cleaning. Clean only
with a damp cloth.
7. Use only attachments recommended by WaveRider.
8. The fins and metal casing protect the EUM3006 from overheating to ensure reliable
operations. Do not cover the EUM3006 and PoE Injector. Do not place the EUM3006
or PoE Injector near or over a radiator, stove, heat register or other source of heat. Do
not place the EUM3006 and PoE Injector in a built-in installation such as a bookcase
or rack unless proper ventilation is provided. The EUM3006 has an outdoor
temperature rating, so it can handle a much larger range of temperatures than the