Wavecom GSM Modem
This confidential document is the property of WAVECOM and may not be copied or circulated without permission
48
7.8. Default configuration Z
Restores the configuration profile.
Application to GSM
ATZ
GSM to application
OK
command valid
7.9. DTE-DCE local flow control +IFC
This command is used to control the operation of local flow control
between the DTE and DCE.
AT+IFC=<DCE_by_DTE>,<DTE_by_DCE>
* < DCE_by_DTE > :
0
none
not supported
1
Xon/Xoff local circuit 103
not supported
2
RTS
supported
3
Xon/Xoff global on circuit 103
not supported
* < DTE_by_DCE > :
0
none
not supported
1
Xon/Xoff circuit 104
not supported
2
CTS
supported
Application to GSM
AT+IFC?
GSM to application
+IFC: 2,2
OK
current values
Application to GSM
AT+IFC=?
GSM to application
+IFC: (0-3),(0-2)
OK
possible values.
Application to GSM
AT+IFC=0,0
GSM to application
OK
new values
7.10. Set DCD signal &C
This commands controls the Data Carrier Detect (DCD) signal.
