2020-12-V1.3
33
● If the equipment does not have an IP address, assign one to it, 192.168.1.1 for the
first device, then 192.168.1.2 for the second device, 192.168.1.3 for the third
device, and so on.
● Write down the IP address and BACnet port, the brand, and model of the
equipment, and any other identifying information. This information will be required
to configure the installation and to retrieve data.
The equipment communicates in LON FT10
To connect the equipment
● Make sure to have an Echelon U60 FT DIN USB Gateway.
Summary of Contents for BOX
