2020-12-V1.3
28
● Connect the network to an RS485 port of the Box
To configure each one of the equipment
● Configure the address of the 1st Modbus slave to 1, the 2nd to 2, the 3rd to 3 and
so on.
● Caution: A network must not contain multiple slaves with the same address.
● Write down the network to which the equipment is connected as well as its address,
brand, and model of the equipment and any identifying information. This information
will be necessary for the installation configuration and to retrieve data.
Summary of Contents for BOX
