background image

Thank you for your purchase of a Premier ZeroWaste

®

 Reverse Osmosis system. With proper installation 

and maintenance, this system will provide you with high quality water for years to come. All of Premier 

water enhancement products are rigorously tested by independent laboratories for safety and reliability. 

If you have any questions or concerns, please contact our customer service department at 

1-800-752-5582 (outside USA 480-675-7995).  

Table of Contents

Operational Parameters ........................................................................................................................ 4
Contents of Reverse Osmosis System .................................................................................................. 4
Tools Recommended For Installation .................................................................................................... 4
Important Notice .................................................................................................................................... 5
Drill a Hole for the Faucet in a Porcelain Sink ....................................................................................... 5
Punch a Hole for the Faucet in a Stainless Steel Sink .......................................................................... 5
Installation of Faucet ............................................................................................................................. 6
Connect Blue Tube from the RO to the Fuacet ..................................................................................... 6
Adapt-a-Valve Installation ...................................................................................................................... 7
Connect the Green and Black Tubing.................................................................................................... 7
Mounting the RO Module....................................................................................................................... 7
Tank Ball Valve Installation  ................................................................................................................... 7
Blue Tube Connection (From the RO Module to TANK) ........................................................................ 8
Start up Instructions............................................................................................................................... 8
6 Month System Maintenance ............................................................................................................... 9
Annual Maintenance ............................................................................................................................ 10
Membrane Maintenance .......................................................................................................................11
Check Air Pressure in the Tank ........................................................................................................... 12
Trouble Shooting  ................................................................................................................................ 12
Faucet Adjustment ............................................................................................................................... 13
Performance Data Sheet ..................................................................................................................... 14
Arsenic Fact Sheet .............................................................................................................................. 15
Flow Chart ........................................................................................................................................... 16
Parts List.............................................................................................................................................. 17
Other Products by Premier ............................................................................................................. 18-20
Warranty Registration ..................................................................................................................... 21-22
Service Record .................................................................................................................................... 23
Warranty .............................................................................................................................................. 24

3

** Before installation, please take a moment to fill out the warranty card on page 21-22.

Summary of Contents for ZRO-4




















Reviews: