Adjust Faucet
If the faucet has developed a drip it can be corrected by following the steps outlined below.
Step 1
Remove faucet Spout first. Position both thumbs on the
back edge of the lever and push forward.
Step 2
Lever will slide forward and completely off of the faucet base.
Step 3
Small brass tee can be turned 1/2 turn, counterclockwise, to adjust
the tension on the black lever. This adjustment may be necessary
to stop slow drips from tip of faucet. You may need to repeat
the
process until the faucet does not drip. Brass tee must always end
up facing across body of faucet in order to slide black lever on.
13
Summary of Contents for ZRO-4
Page 16: ...16 ...
