Installation of Faucet
Insert the faucet shank through the hole in sink and let it rest on the sink top.
Place the escutcheon chrome plate and the black rubber washer on the faucet shank.
(Parts found in faucet parts bag).
From the underside of the sink, slide on the locating washer, lock washer and brass
nut onto the shank. Check orientation of faucet then tighten brass nut securely.
Connect Blue Tube from the RO to the Faucet
Step 9
Locate the blue 1/4” tube attached to the RO module labeled
“Faucet”. Remove a brass nut, plastic sleeve and brass insert from
the parts bag. To assemble, place the brass nut on the blue tube
first, then the sleeve (small tapered end of sleeve must point to the
end of tube) and then push the brass insert all the way into the end
of the tube. (See Picture)
Insert the blue tube into the end of the faucet shank and use a
wrench to tighten the brass nut securely.
Step 10
Step 6
Step 7
Step 8
6
Summary of Contents for ZRO-4
Page 16: ...16 ...