18
EN
Cycle time setting
This menu is displayed only if parameter “Typ” (#26) is equal
to “bp”.
Use minus
and plus
keys to set cycle time value.
The setting is validated with validation key
.
Default value:
10 minutes
Other values:
[10 15 30 45 60]
Proportional Band
This menu is displayed only if parameter “Typ” (#26) is equal
to “bp”.
Use minus
and plus
keys to set proportional band
value.
The setting is validated with validation key
.
Default value:
2°C
Value range:
2°C
to
5°C
First parameter of H&C signal:
width of death band
This menu is displayed only if parameter “Mod” (#07) is equal
to “Aut” or “Aut” is selected in “Reversible” mode menu.
This parameter corresponds to
width of death
band
.
Use minus
and plus
keys to set value.
The setting is validated with validation key
.
Default value:
1°C
Value range:
0°C
to
5°C
by step of
0.5°C
Second parameter of H&C signal:
time threshold
This menu is displayed only if parameter “Mod” (#07) is equal
to “Aut” or “Aut” is selected in “Reversible” mode menu.
This parameter corresponds to a
time threshold
.
Use minus
and plus
keys to set value. The setting is
validated with validation key
.
Default value:
1H
Other values:
no, 30’, 2H, 3H, 4H
and
5H
Minimum value of setting range of the set point
temperature
Default value:
5.0°C
Value range:
5.0°C
to
15.0°C
Maximum value of setting range of the set point tem-
perature
Default value:
30.0°C
Value range:
20.0°C
to
37.0°C