15
EN
Clearing user parameters
holding
button
holding
button
releasing
button
Clearing
is done
PIN code activation
“
Yes
”: activation of function
“
no
”: no activation
More information is in paragraph “PIN code & remote locking”
Default value:
no
Other value:
Yes
Setting value for PIN code
This menu is only displayed if parameter Pin (#09) is set
with “Yes”.
User has to configure values of the three digits with and
validate its choice with validation key
.
Default value:
000
Value range:
000
to
999
Degree unity for displaying
-
°C : Celsius
-
°F : Fahrenheit
Default value:
°C
Values:
°C /°F
Reset user settings:
Press and hold
for 5 seconds to reset, all segments light
up, showing that the thermostat has been reset with the
factory default setting:
-
Set point temperatures in
modes,
-
All user parameters with their factory values.
When button is hold:
Displaying client software version
Pressing and maintaining validation key
displays
software qualification version and debug information.
Reminder: software version is written: Vxx.xx
