Watts Vision BT-CT02-RF, Manual

Page: 6 / 52

6
LIGHTING DEVICES MANAGEMENT
Press on in the main screen and on
1 . Device type choice (heating, lighting, On/Off). These buttons
are only displayed if one device type is installed in the room
(colored if active).
2 . Room changing.
3 . Information about the lighting devices installed in the room.
4 . Indicates both the current lighting device number / the
number of lighting devices in the room.
5 . Indicates the lighting status. A press on it switches the
lighting status.
6 . General management for all lighting in the room.
7 . Current room.
8 . Quick access to the desired room.
9 . Only displayed if the number of devices is upper than 1; used
to select the devices in the room.
10 . Only displayed if the screen is locked.
ON/OFF DEVICES MANAGEMENT
Press on in the main screen and on
1 . Device type choice (heating, lighting, On/Off). These buttons
are only displayed if one device type is installed in the room
(colored if active).
2 . Room changing.
3 . Information about the device.
4 . Indicates both the number of the current device / number of
devices in the room.
5 . Indicates the ON/OFF status. A press on it switches the
status of the device.
6 . General management for all the ON/OFF devices in the
room.
7 . Current room.
8 . Quick access to the desired room.
9 . Only displayed if the number of devices is upper than 1; used
to select the devices in the room.
10 . Long press to switch between auto mode and normal mode
(colored if active).
11 . Displayed only if the device is in Auto mode, press to
access and edit the device program.
12 . Only displayed if the screen is locked.
PAIRING

Create the room if it doesn’t exist
House creation
 

Radio pairing
 
- Choose the device type (heating)
- Choose the room
Note: The master must be the first paired device.
- Put the device in pairing mode (refer to device leaflet)
- Start the pairing on the Central
- Follow the instructions given by the Central (check on the
device that the pairing is successful, refer to the device
leaflet)
- n.b.: Automatic pairing time in case of RF communication
loss: 10s.
INSTALLATION TYPES (HEATING)
Type 1 :
In this configuration:

Pair first the thermostat with the Central before pairing the
other devices.

The actuators regulate on thermostat temperature.
Type 2 :
In this configuration:

Pair first the thermostat with the Central before pairing the
other devices.

The other devices regulate on thermostat temperature.
Warning! In this installation type, the BT (MASTER) must be in
regulation Air mode (not floor or Air + Floor)