3
IOM-T-088 2205
© 2022 tekmar
Important Safety Information
It is your responsibility to ensure that this control is safely installed according to all applicable codes and standards.
Watts
®
is not responsible for damages resulting from improper installation and/or maintenance.
This is a safety-alert symbol.
The safety alert symbol is shown
alone or used with a signal
word (DANGER, WARNING, or
CAUTION), a pictorial and/or a
safety message to identify hazards.
When you see this symbol alone or
with a signal word on your equip-
ment or in this manual, be alert to
the potential for death or serious
personal injury.
This pictorial alerts you to electricity,
electrocution, and shock hazards.
This symbol identifies hazards which, if not avoided, could
result in death or serious injury.
This symbol identifies hazards which, if not avoided, could
result in minor or moderate injury
This symbol identifies practices, actions, or failure to act
which could result in property damage or damage to
the equipment.
• It is the installer’s responsibility to ensure that this
sensor is safely installed according to all applicable
codes and standards.
• This sensor is not intended for use as a primary
limit device. Other devices that are intended and
certified as safety limits must be placed into the
control circuit.
NOTICE
Read manual and all product labels
BEFORE using the equipment.
Do not use unless you know the
safe and proper operation of this
equipment. Keep this manual
available for easy access by all
users. Replacement manuals are
available at tekmarControls.com
Do not attempt to service the sensor. There are no
user serviceable parts inside the sensor. Attempting to
service the sensor voids the warranty.
