LYNC UV-H
SECTION 2: ABOUT THE LYNC UV-H
•
•
•
SECTION 2: ABOUT THE LYNC UV-H
The Lync UV-H system, offered by Lync by Watts and manufactured by UV Pure, is the world
’s only ultraviolet
water disinfection device with patented Crossfire Technology.
Patented in US 6,707,048, Canada 2,463,503, Australia 2,002,333,084, Mexico 248805
Patent Pending in Japan, UK, Europe, & Eurasia.
Revolutionary Crossfire Technology is self-cleaning, self-monitoring, and fail-safe. The UV-H system with Crossfire
Technology is designed to eliminate the potential risks associated with conventional single lamp UV systems.
Committed to exceeding UV disinfection standards, Lync UV-H has turned conventional technology inside-out by
flowing the water inside the quartz sleeve and including two lamps mounted in air, dual or quad smart sensors,
software-designed reflectors and an optional fail-safe solenoid valve.
Crossfire Technology delivers a high UV dose for disinfection:
Crossfire Technology incorporates two proprietary
high-output UV lamps with software-designed reflectors that provide radiation from 360
°
. Amalgam UV lamp
technology has been introduced into the largest units to not only provide higher UV output, but also increased
stability over a wider range of operating temperatures. In addition, the amalgam lamps can be cycled more often
than conventional low pressure high output (LPHO) UV lamps.
Crossfire Technology is capable of treating low UVT water:
The Ultraviolet Transmittance (UVT) of water impacts
the amount of treatment since UV light is absorbed rather than being available for disinfection. With a shorter
path length for the UV light to travel, Crossfire Technology outperforms conventional UV systems and can treat
potable applications as low as 50% UVT and also reuse and waste water in low UVT applications.
Crossfire Technology is engineered to be risk-free and fail-safe:
Crossfire Technology uses dual or quad smart UV
sensors mounted in air, which are designed to not foul and are more reliable indicators of system performance
than ordinary systems. The fan-cooled lamps maintain consistent UV output for maximum delivery. Computerized
alarms and optional auto shutoff fail-safe valve are designed so that only treated water will pass through the unit.
Crossfire Technology is self-cleaning
: Crossfire Technology uses a stainless steel wiper to clean the inside of the
quartz sleeve eliminating fouling and the need for a water softener making abrasive quartz sleeve cleaning a thing
of the past
– saving money and the environment. The wiper is automated to cycle for 5 minutes every 4 hours. The
cycle begins 5 minutes after power is applied. Self-cleaning not available on the NC models.
Crossfire Technology is virtually maintenance-free:
Crossfire technology utilizes two lamps mounted in air,
outside the quartz sleeve so maintaining a Lync UV-H unit is as easy as changing a light bulb with no system
draining required. The UV lamps require replacement after 12 or 16 months of operation depending on the lamp
type and notification of lamp replacement is given via a warning one month in advance.
Crossfire Technology is easy to install:
Provided with either 1
” or 2” male NPT connections. Optional stainless steel
flexible hoses with Female Iron Pipe (FIP) connections are available for purchase for quick and simple installation.
The UV-H has a smart display:
The operator interface is a color touchscreen designed to allow unprecedented
access to information such as lamp lifetime, real-time message history and UV dose display. A real-time clock is
now available for improved troubleshooting and fault resolution.
The UV-H has a built-in purge valve:
The purge valve eliminates the need to shut down the unit in the event of no
water flow for hours, or even days (as long as a pressurized water supply is present). It is designed to prevent
buildup of metals and minerals on internal components. The purge valve also eliminates nuisance alarms from
changing water transmittance conditions. The purge valve is not available on some models.
The UV-H has remote status indication:
The units come standard with warning and run contacts to remotely signal
a control panel. In addition, the units can be started & stopped via external device.
The UV-H has a built-in surge protection:
The power distribution circuit board contains filters and surge protection
devices to increase the reliability of the on-board electronics and ballasts for the UV lamp.
The UV-H offers new interfaces:
The UV-H units are available with a pair of 4-20mA outputs for UV Intensity, Net
UV Transmittance, or UV Dose through an optional add-on device. Modbus, a smart electronic communication
protocol, will also be available when the 4-20mA option is purchased.
The UV-H offers data logging:
The UV-H units are available with an optional USB drive to continuously record
performance on a daily basis.
