background image

P a g e

 

| 11

 

 

Limited Warranty

 

 

Watts warrants each product to be free from defects in material and workmanship under normal 
usage for a period of one year from the date of purchase. In the event of such defects within the 
warranty period, Watts will, at its option, replace or recondition the product without charge.

 

Watts shall in no way be liable for any loss, damage (direct, indirect or consequential), cost or 
expense incurred other then those rights a consumer has under the Consumer Guarantees Act 1993. 
This warranty shall be invalidated by any abuse, misuse, misapplication, improper installation or 
improper maintenance or alteration of the product including the following:

 

1.

 

Faulty operation due to foreign matter in the water supply

 

2.

 

Installation of the product in water supplies that contain excessive dissolved salt or 
chemicals.

 

3.

 

Installation that does not comply with NZ Building Code G12, NZS 4607:1989, any other 
relevant approved Standard or manufacturers instructions and recommendations.

 

4.

 

Abuse or mutilation of a valve during installation or in an attempt to repair or replace the 
product.

 

5.

 

Installation of a product in an application where its intended use is not that for which the valve 
was designed without the prior written consent of Apex Valves Limited.

 

6.

 

Failure due to a lack of maintenance.

 

Watts reserves the right at any time to modify any product design, features or specifications.

 

 

 

Summary of Contents for HYDROGUARD HG210













Reviews: