Page 9
Adapta Valve Installation - Part# 134007
Turn off the cold water supply to the faucet by turning the angle stop valve
completely off.
Reverse Osmosis Module Mounting
Step 13 Determine best location for the RO module to be mounted to allow
for future system maintenance. The parts bag has 2 self tapping
screws. Using a phillips screwdriver, screw them into the cabinet
wall 6” apart and 16” from the bottom of the cabinet.
Step 11
Step 12 Attach adapta valve as illustrated in the three photos above, choosing
the configuration that fits your plumbing. (When attaching the adapta
valve to straight pipe threads, use Teflon tape on the treads.) The green
tube from inlet side of RO module will be cut to length and attached
later in the installation.
Do not cut any RO system tubes at this time
Note:
Caution:
Water supply line to the system must be from the cold water supply line only. Hot water
will severely damage your system.
Configuration for 3/8”
compression fittings
Configuration for 1/2”
compression fittings
Hot
Supply
Cold
Supply
Summary of Contents for B-RO5M-50
Page 31: ...Page 31 ...