Watts Battery WBX 1, Owner'S Manual

Page: 28 / 36

SOLVE PROBLEMS
OWNER’S MANUAL - WATTS
A problem Possible reason Necessary actions
The device emits a
continuous beep
The battery is critically
discharged
Charge the device, to do this, connect the
device to an energy source (mains, solar
panels)
The module is in
protection mode after
power overload
Turn off the device while holding the power
button for 3 seconds. Wait 5 minutes. If
possible, reduce the connected load and restart
the module.
There are popping
sounds inside the
device
The fuse went off
Stop using the module. Disconnect the device
by opening the circuit breaker in the handle of
the module, then disconnect the device from
the network. Then contact your service center
for further advice.
The device›s
indicator light
started flashing
different colors at
different intervals
after touching it
Static discharge on
the body caused an
imbalance in the operation
of microcontrollers or
circuits.
In this housing, turn off the module using the
power on / off button [12] , and then turn it on
again.
27