Watts Battery WBX 1, Owner'S Manual

Page: 23 / 36

Next, connect to your electrical panel. • Be careful, make sure
that the voltage is
turned off.
Connection and operation
OWNER’S MANUAL - WATTS
STEP 7
Installing a stack (multiple WATTS)
STEP 8
4. Determine the length of the cable, taking into account
the padding in the gutter and the distance from the
switchboard.
5. Expose the cable, taking into account that the bare
ends of each cable should not exceed 10 mm (0.39 in)
at both ends, and press the cable as shown.
6. Connect each cable-PE, N, L - to the module as shown
in the figure. When using a multi-core cable, use ferrules
to connect.
• The screwdriver
forcefully
penetrates the
rectangular hole.
• It is not allowed to
connect the power
supply through the
terminal and using
the power cable at
the same time.
22