Watson Marlow Pumps 730 S, Installation, Operating And Maintenance Manual

Page: 2 / 140

11.2 Wiring the US NEMA module 20
11.3 Wiring the NEMA module 20
11.4 Earth screening of control cables on NEMA module 20
11.5 Ethernet M12 connector screen connection 22
12 Start-up check list 23
13 Control wiring 24
13.1 Pump external interface parameters 25
13.2 Features on the rear of the pump 26
13.3 IP31 Wiring connections 27
13.4 Sensor Wiring - IP31 27
13.5 IP66 Wiring - N Module 31
13.6 Input/output connectors - IP66 35
13.7 Network topology 37
14 Switching the pump on for the first time 38
14.1 Selecting the display language 38
14.2 First-time start-up defaults 40
15 Switching the pump on in subsequent power cycles 42
16 Mode menu 43
17 Manual 44
17.1 START 44
17.2 STOP 45
17.3 INCREASING AND DECREASING FLOW RATE 46
17.4 MAX FUNCTION (Manual mode only) 47
18 Flow calibration 48
18.1 Setting the flow calibration 48
19 MemoDose mode 51
19.1 To configure MemoDose 51
19.2 Set flow rate 51
19.3 Resume interrupted doses 52
19.4 Master dose 53
19.5 Manual dosing 56
20 EtherNet/IP™ mode 57
20.1 Configure EtherNet/IP™ Settings 57
2 m-730sn-en-08