Watson Industries, Inc.
SPS-P230 Rev A 10/17/2017
10
3. Loosely attach the servo system to the mounting position using four mounting bolts,
washers and possibly nuts. Use bolts that do not protrude beyond the mounting ring.
4. Once the servo system is aligned, secure the four mounting bolts.
User Payload:
Once the servo system is correctly installed, a payload may be installed on the arm of the servo
system. The SPS has no counterweight and is limited by this load imbalance to a 99 lb (45 Kg)
payload. WARNING – Do not apply power until the installation is complete!
