manualshive.com logo in svg

Watlow D4T, User Manual

Share
Download
Watlow D4T User Manual Download Page 43

Watlow D4T Data Logger 

•

  40  

•

 

Chapter 3 Using the D4T Front Panel

  In the graphic that follows, each page has been configured to display from 1 to 4 loops on 

each page.

6. Define the content blocks (number of loops) that will be displayed on each page.

Personalizing the Home Screen Using the UI

Placement of objects on the home screen can be modified by the user. 

Note:

Prior to personalizing the Home screen first configure pluggable modules and at least one 

control loop.

To personalize the Home screen, do the following:

 

1. From any screen push the 

Menu button.

2. Push 

Personalize. 

3. Push 

Basic Personalization.

4. Select the desired Home Layout by pushing

 Main Top, Main Center or Main Bottom.

The red arrows were placed on this graphic for emphasis only and represent what the focus of 

this operation is; that being, defining the location of the output widget bars. As shown above, 

the options include placing them on the bottom, split screen top and bottom or on the top.
5. Push each page (through 4) in which loop information will be displayed.

Summary of Contents for D4T























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands