background image

26

Chapter Seven

Specifications

Power supply

 

Voltage input 24 V (ac/dc) +10%, -15% 50/60 Hz +/- 5

 

Connection through 2-position removable screw style terminal block

 

22 to 12 AWG

 

Power consumption 10 VA MAX

 

UL Approved, Class 2 power supply required

 

Real-time Clock backed by 3v-lithium battery – RAYOVAC BR1225

Environmental

 

Operating temperature range:

0 to 60

°

C

 

Storage temperature range:

-40 to 70

°

C

 

Operating and storage humidity: 0 to 90% non-condensing

Indication

 

Green LED for Ethernet connection

 

Green LED for Ethernet activity

 

Green LED for EIA-485 or EIA-232 activity

Agency

 

CE Approved, see Declaration of Conformity 61326 Industrial Immunity, Class B Emissions 

Communications

 

MODBUS RTU communications

 

Both EIA-485 and EIA-232 supported at 9600 and 19200 baud

 

Connection through 5-position removable screw style terminal block

 

22 to 12 AWG

 

Ethernet communications

 

Ethernet RJ45 Connector

 

10BaseT per IEEE 802.3 Ethernet Standard 

 

HTTP v1.1

 

Modbus TCP

 

DHCP, Auto IP, Or Fixed IP Address

 

Email Alarm Notification

 

Supports Windows browsers

 

Microsoft Internet Explorer 4.0 or newer

 

Netscape 4.0 or newer

Control Output Signals

Activity L.E.D. for Ethernet communications per IEEE 802.3
Activity L.E.D. for Serial communications.

Enclosure Size 

Dimensional Size - L: 3.75 in X W: 1 in X H: 2.5 in, with cutouts for L.E.D.s, RJ45 port and power jack.  

User Interface

3 L.E.D.s to indicate operation status; Ethernet link, Ethernet traffic and Modbus traffic.

Ordering Information

Order part number EM00-GATE-0000

Summary of Contents for EM00-GATE-0000





























Reviews: