Watlow Controls 8LS, User Manual

Page: 99 / 140

Appendix A: Ramp Soak
8LS User’s Guide 91
Setting the R/S Time Base
The R/S time base menu is in the Setup Globals main menu.
Use this menu to set the time base in all your R/S profiles.
Selectable Values: H/M (Hours/Mins) or M/S (Mins/Secs).
Editing R/S Parameters
You can reach the rest of the menus in this section from the Setup
Ramp/Soak profile main menu. This menu is located between the Setup
Loop Alarms main menu and the Manual I/O Test main menu.
Answering Yes to this prompt allows you to setup or edit R/S profiles.
Choosing a Profile to Edit
Use this menu to choose a profile to set up or edit.
Selectable Values: A to H (8 profiles).
1 2 3 4 5 6 7 8
LOOP PROCESS UNITS
ALARM SETPOINT STATUS OUTPUT%
R/S TIME
BASE? H/M
1 2 3 4 5 6 7 8
LOOP PROCESS UNITS
ALARM SETPOINT STATUS OUTPUT%
SETUP
R/S PRO?
1 2 3 4 5 6 7 8
LOOP PROCESS UNITS
ALARM SETPOINT STATUS OUTPUT%
R/S PRO
PROF? A