WATERS NETWORK SYSTEMS
™ ProSwitch
®
-
2600M User’s Manual
Page
14
6. Select
VLAN Settings
.
7. To add a port , press
+
(the plus key).
8. Select
Tagged
or
Untagged
.
9. Select
the
port number
.
10. Repeat these steps to add additional ports.
11. Press
Esc
to return to the desired menu.
Deleting Ports from a VLAN
1. From
the
Switch Management Menu
, select
Advanced Management
.
2. Select
L2 Switching DataBase
.
3. Access
the
VLAN & PVID Perspective
menu.
4. Select
VLAN Settings
.
5. Highlight an existing VLAN and press
Enter
.
6. Select
VLAN Settings
.
7. To delete a port, highlight the port and press
–
(the minus key).
8. Repeat
Step 5
to remove additional ports from the VLAN.
Assigning PVID
1. From
the
Switch Management Menu
, select
Advanced Management
.
2. Select
L2 Switching DataBase
.
3. Access
the
VLAN & PVID Perspective
menu.
4. Select
PVID Settings
.
5. Select the appropriate port number and press
Enter
.
6. Enter
the
PVID
.
7. Press
Esc
when finished.
Note
: Because there is no VLAN information in untagged packets for untagged ports, you can assign a VLAN
ID to untagged ports with this function. It is not necessary for tagged ports, because there is already VLAN
information in the packets. (Tagged ports only for tagged network devices only. Don't use tagged ports for
untagged devices.)
IP Multicast Group Perspective
The IP multicast group perspective provides information associated with an IP multicast group. To obtain this
information:
1. Select
L2 Switching DataBase
from the
Advanced Management
menu.
2. Select
IP Multicast Group Perspective
and press
Enter
.
Note:
If the IGMP protocol is disabled, a message will be displayed that says “IGMP Currently Disabled.” To
enable IGMP:
a. Return to the
Advanced Management
menu.
b. Select
Other Protocols
.
c. Press
Enter
for
IGMP
.
d. Select
IGMP
and press
Enter
.
e. Press
Enter
.
