Waters Network Systems
2800M/MR User’s Manual
Page 131
Command
Syntax
Description
Argument
Possible
Value
[<action>
<value>]
[<action> <value>]
a(ccept) or d(eny)
Any
[<port>
<value>] 1 or 1-
8 or 1, 3-5 or
any
[<type>
<value>] h(ttp),
s(nmp), t(elnet)
or any
[<action>
<value>] No
default; must
be set
Show
show
Used to show the specific
management policy record
None
None
Max-pkt-len
Set len
set len <range>
<lenth>
Used to set the maximum
length of the packet that each
port of the switch can accept
<range>: port range,
syntax 1, 5-7,
available from 1 to 16
(24)
<length (bytes)>:
maximum packet
length
<range>: 1 to
16 (24)
<length
(bytes)>:
1518/1343/921
6
Show
show
Used to display current setting
for maximum packet length
None
None
Mirror
Set mirror-
mode
set mirror-
mode
<rx|disable>
Used to set the mirror mode (rx
mode or disable)
<rx | disable>:
rx:enable the mode of
mirror (only mirror
packets that are
received)
Disable: end of the
function of mirroring
<rx | diable>: rx
or disable
Set monitored
port
set monitored-
port <range>
Used to set the port that will be
monitored. The packets
received by this port will be
copied to the monitoring port.
<range>: the port that
is chosen for
monitored port for the
mirror function,
syntax 1, 5-7,
available from 1 to 16
(24)
<range>: 1 to
16 (24)
Set
monitoring-
port
set monitoring-
port
Used to set the monitoring port
for the mirror function. User
can observe the packets of the
monitored port received by this
port.
<#>: the monitoring
port that is chosen for
the mirror function.
Only one port is
allowed to configure,
available from 1 to 16
(24)
<#>: 1 to 16
(24)
Show
show
Used to display the setting
status of the Mirror function
None
None
Port
Clear counter
clear counter
Used to clear all ports’ counter
None
None
