background image

Assembly and Operating Instructions Sand Filter System without Pre-filter

10

English

1. FILTER SYSTEM – DESCRIPTION

The sand filter system you have 

purchased is a high-quality quality 

product. We hope you will enjoy your 

swimming pool and the filter system.

We recommend that you read these assembly 

instructions and the enclosed operating instructions 

for the pump carefully. Keep them in a safe place 

and familiarize yourself with the special features 

and possible uses of this system. The filter system 

ensures a mechanical treatment of swimming pool 

water. However, an impeccable water quality can 

only be guaranteed if the water is treated chemically 

in addition (see information on reverse side).

 

 

1.1 DESCRIPTION OF 6-WAY VALVE

The individual functions/positions of the plastic 

valve are clearly marked on the upper side so that 

there is no risk of confusion. 

Please also observe 

the drawings and explanations in our Quick 

Start Guide on page 5.

1.1.1

  

FILTER:  

Filtration (operating state)

 

In this position, the swimming pool water is 

pumped through the filter tank and quartz sand 

and then back to the pool. The dirt is filtered 

out via the quartz sand.

1.1.2   Closed:  

Servicing

  

All functions are disabled in this position. The 

circulation pump must not be switched on. This 

position is used when maintenance works are 

carried out in the filter tank.

1.1.3   Backwash:  

CLEANING THE Filter system

 

In this position, the swimming pool water 

is pumped through the filter in the opposite 

direction (from bottom to top) to clean it. The 

waste water is drained sideways out of the 

valve (hose outlet = waste).

1.1.4   Recirculate:  

Circulate without filtration 

 

(increased circulation) 

In this position, the swimming pool water flows 

right into the swimming pool, the filter tank is 

bypassed. This setting is used after adding 

pool chemicals (e.g. after a shock chlorinati

-

on).

1.1.5  RINSE:  

Filtration into the sewer

 

In this position, the lines of the filter system are 

cleaned from residual dirt after backwashing.

1.1.6   Waste:  

Emptying/Sewer

 

In this position, the swimming pool water is 

pumped directly into the sewer (valve outlet 

‚Waste‘).

Summary of Contents for SF 122

























Reviews: