Pressurized Cab Filter
K00037
• Your Broce Broom comes with a
standard filter. This how-to shows you
how to change it and install a pressurized
cab filter.
1. Start by removing the filter from the front of
the broom.
2. You’ll want to remove the hose clamp first.
3. After you’ve removed the hose clamp, while
stabilizing the filter, remove the two screws
located at the top.
4. Once the filter is off, you can start prepping
the new pressurized filter to be installed onto
the cab.
5. Your new cab filter comes with the filter
itself and the wires needed. You will need to
change out the end of the wire provided.
6. The wire has two ends. One end is shaped
like a triangle and one is shaped like a
rectangle. Clip the rectangle end off.
7. Next pull the plastic covering out from that
end about 3 inches and cut that off. When you
slide it back down in place, the end wires will
be exposed.
8. Strip the ends of the wires.
2
3
