WL15
Manual
Page 40 – Revision: 4-15-22
WL15: HOT TANK DESCALING
The Hot Tank requires removal of mineral deposits (descaling) on a regular basis. Typically
descaling should take place every 6 to 12 months to preserve the long-term health of your unit.
Use non-toxic cleaner such as ScaleKleen, DEZCAL, 20% Citric Acid Solution, or Undiluted
Vinegar Solution to remove mineral deposits as directed by the manufacturer depending upon
filtration and local water conditions.
Descaling is an important process that removes calcium deposits, or scale, that can build up
inside a tank over time. Calcium and scale is non-toxic but left unattended will hinder your
WL250 Water Treatment System’s performance.
WARNING!
USE PROPER PERSONAL PROTECTIVE EQUIPMENT
Always ensure proper ventilation and use proper personal protective equipment such as
gloves and eye protection when using chemicals. Refer to Material Safety Data Sheet for
specific requirements of each chemical product. Take all necessary precautions to
prevent sanitizer from contacting eyes, clothing, and any other surfaces in could damage
(carpets).
CAUTION!
STAINLESS STEEL TANK DESCALING.
The Hot Tank is made from stainless steel. Ensure descaling solution is compatible with
stainless and always flush the
WL15 Water Treatment System
completely. Dispose in an
environmentally safe manner.
Materials Needed:
Personal Protective Equipment. Rubber or Nitrile Safety Gloves and Protective Eyewear
Phillips Screwdriver
Water Pitcher or Container to collect water from the faucet
Sanitizer - Household Bleach (5.25% Sodium Hypochlorite) or Citric Acid Based Cleaner
1/4” Plastic Tubing and assorted 1/4” quick connect fittings
Food Coloring (optional)
1.
Shut off the water supply to the machine. Also, shutoff the Hot switch on the back of
the unit.
2.
Remove the two screws shown and remove the top panel of the unit and set aside.