infiniti
Operating, Installation, and Service Manual Page 21 - Revision: 9-15-2016
REPLACEMENT COMPONENTS
Component
Part No.
Frequency of Replacement
Hot Tank (Factory Set Point of
185°F - 85°C)
1.6 Liter Capacity
HT-3024
Replace every 3-5 years depending on
usage.
WLCP PN 10-4029
Replacement parts can be obtained from
Waterlogic
Dealer
.
See Parts Layout Drawing and Parts List for additional repair parts.
Hot Tank Service
Hot Tanks (with controls) must be replaced at least every 3-5 years depending on usage.
Descaling hot tank may be required on a regular basis depending upon filtration and local water
conditions. See Service Section.
NOTE:
At the end of this product’s life, ensure that it is disposed of in an environmentally friendly manner
which is fully compliant with all Federal/State/Local Requirements and Guidelines.