infiniti
Operating, Installation, and Service Manual Page 14 - Revision: 9-15-2016
WARNING!
Use Personal Protective Equipment. Gloves and Eye Protection Required. The first
2 or 3 gallons of water will contain concentrated sanitizer. Use extreme care!
Fill the Hot Tank
16.
Press the Hot Water Select Button, followed by the main dispensing button to fill the hot tank.
Water will dispense from the faucet once the hot tank is full. Flush until water is clear.
WARNING!
HOT CIRCUIT IS NOT SANITIZED.
Water in the hot circuit is not sanitary until the temperature exceeds 171
o
F (77°C) for at least 5
minutes.
Heater Test
17.
Always ensure tanks are full of water before turning on the heater or the overload (high limit) will
open and require manual reset. It will take the heater approximately 10 minutes to heat the
water from ambient 75
°
F (24°C) to the factory set point of 185
°
F (85°C). Dispense a cup of hot
water to ensure the temperature/odor/taste is acceptable.
WARNING!
VERY HOT WATER CAN BURN OR SCALD.
Hot water should be dispensed carefully into insulated container to avoid injury.