WATERKOTTE EcoTouch DS 5027 Ai, Planning And Installation Manual

Page: 8 / 60

Safety
2005/06/10
8 / 60
Copyright

2013 by: WATERKOTTE GmbH. Subject to changes.
Risk of injury!
Risk of chemical burns when skin comes in direct contact with lubricant
leak.
Wear suitable clothing when performing maintenance work on the heat
pump!
Risk of injury in case of leakage in cooling circuit!
Skin contact with refrigerant may cause freezing of tissue and frostbites.
High vapour concentrations can cause headaches, dizziness, fatigue, nau-
sea and even unconsciousness. Irregular heartbeat (arrhythmia).
Avoid contact with refrigerant! Do not expose to heat, sparks, naked light or
other ignition sources
Electrostatic charge!
Electronic components can be damaged by electrostatic processes.
Ground yourself before touching electronic Ground yourself before touching
electronic components.
Risk of total loss!
Repeated restart of heat pump can result in total loss!
In case of heat pump failure, before restart an inspection by qualified and
authorised personnel must be performed.
Due to test bench operation, the heat pump can have ethylene glycol resi-
dues.
1.4 Specific types of hazards
To avoid damage to machine or life-threatening injuries during installation of
machine, the following points must be observed:

Machine parts that are improperly placed or incorrectly attached can fall
down or overturn.

Sharp-edged machine parts that are still exposed and accessible can
result in injury.

Incorrectly installed lines (e.g. insufficient bending radius) can cause
smouldering and cable fires.

Risk of chemical burns when skin comes in direct contact with lubricant
leak.

Electronic components can be damaged by electrostatic processes.