WATERKOTTE EcoTouch Ai1 Geo, Planning And Installation

Page: 22 / 60

Installation of heat pump and tank
12.11.2015
22 / 60
Z21826
Copyright

2013 by: WATERKOTTE GmbH. Subject to changes
7.2.1 Dismantlement/ Assembly of the heat pump (service event)
When it is necessary to dismantle the heat pump you are able to split the upper
and the lower part.
Procedure:

Switch the heat pump currentless (fuse box)

Close the hydraulical circuit and void the drinking water storage

Free the connecting hose to the storage (up and low), see the pictures
Figure 6: Storage connectings (left: storage connecting top with vent valve)

Separate the electrical connection to the display and the temperature sensor

Free the 16 lens head screws at the montage strives (see at the picture)

Lift the storage module and put it on a plane area
Figure 7: Rear safed with lens-head screws (Pos. 1)
Note: For lifting the storage module you need sveral people.
The module weights about 59 kg.