42
5 SERIES OPTIHEAT 504W11 INSTALLATION MANUAL
Check One
Start up/Check-out for new installation
T
Troubleshooting Problem:___________________________________
T
1. FLOW RATE IN GPM (SOURCE/LOAD SIDE HEAT EXCHANGER)
Water In Pressure:
a.______
PSI
Water Out Pressure:
b.______
PSI
Pressure Drop = a - b
c.______
PSI
Convert Pressure Drop to Flow Rate
(refer to
Pressure Drop
table)
d.______
GPM
a.______
PSI
b.______
PSI
c.______
PSI
d.______
GPM
2. TEMPERATURE RISE OR DROP ACROSS SOURCE SIDE HEAT EXCHANGER
COOLING
HEATING
Water In Temperature:
e.______
°F
e.______
°F
Water Out Temperature:
f. ______
°F
f. ______
°F
Temperature Difference:
g.______
°F
g.______
°F
3. TEMPERATURE RISE OR DROP ACROSS LOAD SIDE HEAT EXCHANGER
COOLING
HEATING
Water In Temperature:
h.______
°F
h.______
°F
Water Out Temperature:
i. ______
°F
i. ______
°F
Temperature Difference:
j. ______
°F
j. ______
°F
4. HEAT OF REJECTION (HR) / HEAT OF EXTRACTION (HE) CALCULATION
HR or HE = Flow Rate x Temperature Difference x Brine Factor*
d. (above) x g. (above) x 485 for Methanol or Environol, 500 for water*
Heat of Extraction (Heating Mode) =
btu/hr
Heat of Rejection (Cooling Mode) =
btu/hr
Compare results to Capacity Data Tables
Note: Steps 5 through 8 need only be completed if a problem is suspected
5. WATTS
COOLING
HEATING
HYDRONIC
Volts:
m._____
VOLTS
m.______
VOLTS
m. ______
VOLTS
Total Amps (Comp. + Fan):
n. _____
AMPS
n. ______
AMPS
n. ______
AMPS
Watts = m. x n. x 0.85
o. _____
WATTS
o. ______
WATTS
o. ______
WATTS
6. CAPACITY
Cooling Capacity = HR. - (o. x 3.413)
p . _____
btu/hr
Heating Capacity= HE. + (o. x 3.413)
p . _____
btu/hr
7. EFFICIENCY
Cooling EER = p. / o.
q . _____
EER
Heating COP = p. / (o. x 3.413)
q . _____
COP
8. SUPERHEAT (S.H.) / SUBCOOLING (S.C.)
COOLING
HEATING
HYDRONIC
Suction Pressure:
r. ______
PSI
r. ______
PSI
r. ______
PSI
Suction Saturation Temperature:
s. ______
°F
s. ______
°F
s. ______
°F
Suction Line Temperature:
t. ______
°F
t. ______
°F
t. ______
°F
Superheat = t. - s.
u. _____
°F
u. ______
°F
u. ______
°F
Head Pressure:
v. ______
PSI
v. ______
PSI
v. ______
PSI
High Pressure Saturation Temp.:
w. _____
°F
w. _____
°F
w. _____
°F
Liquid Line Temperature*:
x. ______
°F
x. ______
°F
x. ______
°F
Subcooling = w. - x.
y. ______
°F
y. ______
°F
y. ______
°F
* Note: Liquid line is between the source heat exchanger and the expansion valve in the cooling mode;
between the load heat exchanger and the expansion valve in the heating mode.
Company Name: _________________________________
Technician Name: ________________________________
Model No: ______________________________________
Owner’s Name: __________________________________
Installation Address: ______________________________
Company Phone No: ______________________________
Date: __________________________________________
Serial No:_______________________________________
Open or Closed Loop: _____________________________
Installation Date: _________________________________
COOLING
5 Series 504W11 OptiHeat Startup and Troubleshooting Form
Summary of Contents for 5 Series 504W11 OptiHeat
Page 2: ......
Page 46: ...46 5 SERIES OPTIHEAT 504W11 INSTALLATION MANUAL Notes...
