11
Display Status:
Status
Status
Replace Soon
Replace Now
Good
Normal
Pre-warning
Warning
≤15
≤ 0
≤40
≤ 0
>
15
>
40
Blue
Purple
Red
N/A
Beeps 2 times when
dispensing water
Keeps beeping when
dispensing water
Indication
Light
Buzzer
Remaining
Life (Day)
Remaining Capacity (G)
NOTE:
The indicators will notify you according to the usage time or processing
capacity of the filters, whichever comes first.
There are helpful electronic filter indicators (CF/MRO) on the front panel that will
notify you to perform routine filter replacement by color change. Be sure to reset
the filter life indicator every time you replace your filter.
NOTE:
If the filter expires, please purchase and replace the filter immediately.
Otherwise, the filtration efficiency will decrease significantly and affect the
performance.
Section 3: Filter Replacement Guide
How to Replace Filters:
The filters could be replaced directly without cutting off the power and water, and
there will be no water and electric leakage.
1. Twist the filter that needs to be replaced counterclockwise (Figure 13);
NOTE:
The CF filter is relatively short. When removing the filter, it is
recommended to hold the filter with one hand, while rotating and removing
the filter with the other hand, in order to prevent the filter from falling out of the
system.
2. Remove wrappings and protective cap from the new filter;
3. Insert the filter into its corresponding hole, aligning the arrow with the empty
circle on the housing;
4. Twist the filter with a little force forward in a clockwise direction for 90 degrees,
until the arrow is aligned with the solid circle on the housing. You may hear a
click when the filter is fitted into the place properly;
NOTE:
Repeat the above steps to install the other filter.
5. Reset the filter life indicator and flush the filter after replacement (please refer
to the following steps).
Good
Replace Soon
Replace Now
