Water Depot Blaster Soft, Owner'S Manual

Page: 20 / 32

20
Injector Cap, Injector Screen, Injector, Plug and O-Ring
Drawing
No.
Order No. Description Quantity
1 CLK V3176 Injector Cap 1
2 CLK V3152 O-ring 135 1
3 CLK V3177 Injector Screen 1
4 CLK V30101Z WD1 Injector ASY Z Plug 1
5
CLK V30101A WD1 INJECTOR ASY A BLACK
1
CLK V30101B WD1 INJECTOR ASY B BROWN
CLK V30101C WD1 INJECTOR ASY C VIOLET
CLK V30101D WD1 INJECTOR ASY D RED
CLK V30101E WD1 INJECTOR ASY E WHITE
CLK V30101F WD1 INJECTOR ASY F BLUE
CLK V30101G WD1 INJECTOR ASY G YELLOW
CLK V30101H WD1 INJECTOR ASY H GREEN
CLK V30101I WD1 INJECTOR ASY I ORANGE
CLK V30101J WD1 INJECTOR ASY J LIGHT BLUE
CLK V30101K WD1 INJECTOR ASY K LIGHT GREEN
Not Shown CLK V3170 O-ring 011 *
Not Shown CLK V3171 O-ring 013 *
* The injector plug and the injector each contain one 011 (lower) and 013 (upper) o-ring.
Note: For upflow position, injector is located in the up hole and injector plug is in the
other hole. WS1HR&HS upflow bodies are identified by having the DN marking removed.
For a filter that only backwashes, injector plugs are located in both holes.