23833A472
10
Thread the 1" female PVC adapter
onto the 1" x 4" nipple.
Thread the 1-1/4" male PVC
adapter into top hole in front of
the pump. Thread 1" x 4" nipple
into bottom hole in front of the
pump.
1-1/4" MALE
PVC ADAPTER
1" x 4"
NIPPLE
STEP
10
STEP
11
1-1/4"
FEMALE
PVC
ADAPTER
Cement
as many
sections
and
couplings
of 1-1/4"
PVC pipe
as needed to connect top male 1-1/4" PVC adapter on
front of the pump to top male 1-1/4" PVC adapter on
front of packer well adapter. Cement as many sections and
couplings of 1" PVC pipe as needed to connect 1" female
PVC adapter on 1" x 4" nipple to 1-1/4" to 1" PVC reducer
on front of packer well adapter. (FOLLOW STEPS 10–18 IN
THE RC10 4" DIAMETER DEEP WELL PUMP INSTALLATION
INSTRUCTIONS on pages 7 and 8. Complete installation
should look like drawing to the right.)
STEP
12
PRESSURE PIPE
1-1/4" PVC PIPE
DELIVERY PIPE
1" PVC PIPE
PUMP
ADAPTER
PLATE
GASKET
ADAPTER
PLATE
ALLEN
BOLTS
PACKER
WELL
ADAPTER
PACKER
WELL
ADAPTER
BOLTS
PACKER
WELL
ADAPTER
GASKET
ALTERNATE PACKER/PUMP CONNECTION FOR
RC10 & RC5
The Adapter Plate RPA connects directly to packer well adapter.
Position adapter plate gasket between pump and adapter plate (large
holes of adapter plate should face away from pump). Bolt adapter
plate to front of pump with two Allen bolts included with Adapter
Plate RPA, then bolt packer well adapter to adapter plate.
Thread two 1-1/4" male PVC
adapters into front of packer well
adapter. The top hole is for the
delivery pipe. The bottom hole is
for the pressure pipe.
STEP
8
1-1/4" MALE
PVC
ADAPTERS
1-1/4" to 1"
REDUCER
Cement the 1-1/4" to 1" PVC
reducer to the bottom male PVC
adapter on the packer well adapter.
STEP
9
Notice: Plastic shipping base is attached to prevent movement in shipment only.
Do not return pump if shipping base becomes cracked in shipment, as pump
performance will not be affected.
** Requires RP2 packer ejector kit (sold separately).
Single Pipe
Packer Ejector**
Packer Well
Adapter
