3
Connection Guide
1.
Mount the 4 Cameras as required and connect them to the POE Network Switch using the
supplied Network Cables on ports 2, 3, 4, 5.
2.
Connect the
48V Power Supply
marked
SWITCH
to the POE Network Switch.
3.
Connect a Network Cable to the rear of the NVR in the socket labelled
LAN
. Then connect the
other end to the POE Network Switch on port 1.
4.
Connect the
19V Power Supply
labeled
NVR
to the NVR.
5.
Plug both power adaptors into a Power-point.
6.
The power LED at the front of the NVR should now be illuminated and the unit will make a loud
beep sound to indicate it is powered.
7.
Connect the included mouse to the USB port on the front marked with a mouse symbol.
Front Panel
1
“
POWER
”
Indicates the NVR is plugged into power.
2
“
ALARM
”
Indicates that an alarm event is occurring.
3
“
WAN
”
Shows that the NVR is connected to the internet.
4
“LAN”
Shows that the NVR is connected to the network switch and cameras.
5
“RECORD”
Indicates that the NVR is currently recording.
6
“USB PORT”
A compatible USB flash drive can be plugged in for backing up
recorded video.
7
“
HDD1/HDD2
”
These lights show that the Hard drives are working correctly. (The
NVR4ENTPACK comes with one installed drive).
8
“MOUSE PORT”
Use this port to plug in a USB mouse.
2
4
1
3
5
6
7
8
