Watchguard hifi microphone, User Manual

Page: 25 / 40

Power switch
l
Normal operation : When the mic and base are on and functioning
normally, but not transmitting audio to be recorded, both of the LEDs are
off.
l
Recording : When the audio transmitted from the mic is being recorded,
the green LED is on. For information about triggering a recorded event
from the HiFi Mic, see
Talk/Mute slide button on page 22 .
l
Muted : When the mic is muted, the green LED flashes. For information
about muting the HiFi Mic, see Talk/Mute slide button on page 22 .
l
Turned off : When the mic is turned off and not in the base, both of the
LEDs are off.
l
Covert mode : When the mic is in Covert mode, both of the LEDs are off.
For information on using the HiFi Mic in Covert mode, see Mode button on
page 23 .
l
Lost connection/out of range : If the mic loses connection to or is out
of range of the base, the red LED flashes until the connection is
reestablished.
For information on the status LEDs on the base, see Status LEDs on page
19 ; for information on the icons on the display, see Display on page 26 .
Power switch
The Power switch is on the bottom of
the transmitter (mic) between the
contacts for charging and
synchronizing. Slide this switch to
power the mic on or off.
Note: WatchGuard Video recommends that you power
off the mic before you put it in the base to charge.
Contacts for charging and synchronizing
The contacts for charging the transmitter (mic) and synchronizing the
mic with the base are on the bottom of the mic. These contacts physically
line up with those inside on the floor of the base and make it possible for
the base to charge and sync with the mic.
WGD00091
Revision F
25