manualshive.com logo in svg

Watchguard DVR4ENTPACK3, User Manual, Page: 19 / 47

Share
Download
Watchguard DVR4ENTPACK3 User Manual Download Page 19

Backup > USB Backup 

 

USB BACKUP

 

 

This function allows you to backup the footage from the Hard Drives onto a USB Flash Drive. The copied footage can be 
played directly on your PC via the supplied licensed software “Video Viewer”  
 
After inserting a USB into the DVR and selecting USB Backup, the following menu items will appear 

 
START TIME: 

Select the start time of the footage which is to be backed up. 
 

END TIME: 

Select the end time of the footage which is to be backed up 
 

AVAILABLE SIZE: 

Displays the available capacity of the inserted USB flash drive. 
 

CHANNEL: 

Select the channels to back up. Select the channels by pressing “ENTER” to change the symbol in front of the channel 
number. 
Symbol “ 

 ” means that this channel is selected to backup. 

Symbol “ 

□

 ” means that this channel is not selected to backup. 

 

HDD Num: 

Select the HDD containing the footage that you need. 
 

START: 

Press “ENTER” to start copying the chosen data onto the USB flash drive. 

- 19 - 

Summary of Contents for DVR4ENTPACK3
















































Reviews:

No comments