- 15 -
Section 2 – Network Operation
Introduction
There are two ways you can remotely connect to your DVR.
The first method is to connect using the AP software. This must be installed on your computer.
The second method is to connect using Internet Explorer.
Either method requires that Windows networking has been set up correctly for the DVR prior to connection. Refer to the
Microsoft Windows documentation or contact an IT Professional for more information.
Default DVR Network settings
Username:
admin
Password:
admin
IP Address:
192.168.0.1
Port:
80
Connecting via AP Software
Install AP Software
You can obtain the AP software from the supplied CD-ROM or by browsing to
http://www.watchguardalarms.com.au/dvr4entpack.php
and following the directions on the page.
Note
: Refer to page 14 on information regarding checking / altering the DVR’s network settings.
AP Software – Login Screen
Login
Exit
Port
Username
Password
IP Address
Search for DVR
DVR List
Open Backed Up footage
Upgrade Firmware
Copy AP Software Settings
