- 12 -
Advance > Remote
Device
Configures whether the camera attached to this channel is a
NORMAL
or
PTZ
camera.
ID
Configures the PTZ ID of the camera. Range of
1 ~ 255
.
Protocol
Configures the protocol for the camera as either
NORMAL
or Pelco-D
P-D
.
Rate
Configures the baud rate used by the camera as either
2400
,
4800
,
9600
,
19200
,
57600
.
Connection Guide
Connect “RS485-A” line (brown colour) to RS485-A port on the rear panel of the DVR.
Connect “RS485-B” line (orange colour) to RS485-B port on the rear panel of the DVR.
R
R
E
E
M
M
O
O
T
T
E
E
TITLE DEVICE
ID
PROTOCOL
RATE
01
PTZ
001
P - D
02400
02
CAMERA
002
NORMAL
02400
03
CAMERA
003
NORMAL
02400
04
CAMERA
004
NORMAL
02400
Note:
This section of the menu is for configuring the DVR to send PTZ commands to cameras. Please note that the
cameras supplied with this DVR do not support this feature.
If you wish to use a PTZ camera with this DVR, the camera must support the Pelco-D protocol.
For more information on setting up a PTZ camera, refer to your cameras manual.
